drywall sander(UTD-700A)

drywall sander/wall polishing machine

Product name: Drywall sander /Wall polishing machine Model number: UTD-700ARated power: 710WRated Voltage: 220V/50HZNo load Speed: 1000-2000r/minDia of abrasive disc 225mmWeight: 4.5kgQty/ctn: 1pcs/ctn

Use of Method:      1.Open the box, take out the sander, vacuum cleaner, dust collecting tube      2.Dust collecting tube and the vacuum cleaner suction pipe and vacuum cleaners,       vacuum bag outlet connected for rotation with the dust collecting pipe connection.      3.Dust collecting tube and the vacuum rotary connection, dust collecting tube       sealing cover dust outlet connection.       4.Connect vacuum cleaner roller       5.Sandpaper is pasted on the disc surface      6.Power line plug is connected with an external power supply.       7.A hand-held sander, disc facing the work surface,        open the toolbox to power switch, then operation.      8.The job is completed, by the use of attachment procedure returns       the disassembly, load the toolbox.              Application notices       1.This machine is strictly prohibited in the wet, wet wet face, the rain under       the condition of operation.       2. strictly prohibited in the flammable and explosive place to operate.      3.Forbidden to beat the sander, trampling the toolbox.       4.No direct grinding machine power line pull hanging, so as to avoid the       power line and grinding machine contact drop.      5.Assembly, disassembly grinding machine should be cut off the power supply.       6.Each part connecting screw, nut should be tightened      7.Dust brought to ground clearance, so as not to affect the dust absorption effect.       8.Pay attention to whether the disc plane with sealing cover edge       at the same plane, or affect the sanding effect.       9.This machine is idle, should be stored in dry and the children can not touch.       10.before Using this tool, must confirm the power switch in the off position.       11.Never put the work aside to turn the power switch on the mill.       12.Must have working mill hold before opening the power switch      

Grinding machine maintenance       1.Regular (2-3 months) for variable speed gear lubricating grease.       2.Ground cleaning dust suction effect, keep the best state.       3.Always check whether the need to replace the motor carbon brush.       4.Check the working disc is deformed or degumming, or friction sealing cover.  

drywall sander(UTD-700A)